Problems: Automag RT upgrading with Intelliframe and Level 10

[.alkalinetrio.]

I am getting back into paintball and have an older RT. I decided I would upgrade my gun instead of purchasing a new one. I found alot of people liked the intelliframe and the level 10 kit so I ordered them and got them today.

I installed the Intelliframe first. I think it is installed fine. It seems to go into almost a full auto type motion and was wondering if this was normal. I went out and shot a hopper through it and it seemed to not gas up fast enough our something wasn't working right. I like the blade trigger alot though.

Next I moved onto the level 10 kit. I watched the video and also followed the detailed install directions. I got the 1.5 carrier and it leaked, I pushed a squegee on the bolt and it changed tone so I moved the the 1 and it stopped. But then I couldn't get the gun to react to a trigger pull. Any ideas???

I am running a 68 ci 4500psi Nitro tank at 750 into the gun. Do I need to bring that up now? Also, I kinda feel like the 1 carrier is too tight but the 1.5 leaks. I also noticed that the bolt seems to catch on something when I run it over the Power Tube Tip.

I can't think of any other things I left out. If I did please ask and I will try to fill you in more on the problem.

Thanks,
Mark

[Peach]

The "catching" is when the bolt enters the sealed o-ring part in the power tube. Make sure to 1.) Turn your velocity up. and 2.) If your tank is adjustable.. Try upping the input pressure.

I can't think of any other reason why your valve would sputter or not recharge fully... Play around with the shims and use the shortest spring if you have an older reg. piston.

Thats all I can think of right now.

[.alkalinetrio.]

Thanks for the reply

I ran out of air messing with this. I will get more and update you on my progress.

Thanks for the quick reply Peach.

[EsPo]

Re: Thanks for the reply

Originally posted by .alkalinetrio.
I ran out of air messing with this.

happens to the best of us...

btw..alkaline trio is the shiz..