first upgrade for a mag?

[blitz134]

kinda taking a poll here...i was just told that the first mag upgrade should be a new frame...who all agrees...and if not a frame then what would be the best first upgrade

[Load SM5]

I would thing a good barrel to match the paint you normally shoot would be first. Nothing is wrong with the stock frame.

[MikeCouves]

Keep your stock frame, cut it and put on a double trigger. It is a cheap way to shoot faster. Also, save up for a nitro tank setup with Drop Forward, Gas Thru and all the goodies...

[FooTemps]

Get N2 and N2 goodies a la 4.5k psi flatline tank, slide check, qd, gas through, etc. Then worry about the trigger frame. If you get the n2 goodies don't forget a ricochet, revvy, warp, or halo.

[davej946]

Decent barrel to match the paint you shoot most often. Then I would look into a nitro setup. The preset tanks are great. Simple installation and use. Just screw them in to the ASA and shoot! :)

[slateman]

Definatly get a new barrel. After that you want some kind of nitro, I personally use PMI 47/3000 but I'm hoping to upgrade to a 45/45. After that, a double trigger and a agitating hopper. Good luck!

PS: check out my new sig and give me some input

[alf]

assuming co2
1. expansion chamber
2. revvy/ricochet
3. barrel

assuming nitro
1. revvy/richochet
2. barrel
3. retro valve

[TheTramp]

I was going to make a list but alf hit the nail right on the head. 12V Revy is a must. Then a barrell to match the paint you'll shoot most. After these I'd get N2 if you don't have it or a Retro if you do.

A good N2 tank to start with is the Crossfire 68ci 3000psi "Stub" tank.

I'd wait to get a new trigger frame until you have these upgrades. Then I would get an Intelliframe.

[IAN]

Before spending lots of money on HPA or frames Try a new bolt if the stock one dose not work for u