Are the RT valve and Evalve the same?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • StygShore
    Waterford, MI

    • Aug 2002
    • 2854
    #1

    Are the RT valve and Evalve the same?

    I have a ReTro valve in my Micromag, and I am going to be upgrading it to an E-Micro. Will the ReTro valve work the same at the E-valve, or do I have to make any kind of adjustments?

    Thanks
    Sometimes It's Good to be EVIL
    Tags: None
    • digitard
      DigiWang .. Special Ed
      • Nov 2002
      • 1678
      #2
      The On/Off pins are different lengths in standard, rt and Emags .... but other than that they're the same valve. So you should just keep the Emag valve in the Emicro.

      Sincerely,
      Dave K
      Its a wakeup call for the Nintendo generation
      GregHastingsPaintball 3 is coming

        Comment

        • athomas
          Of course it works-its AGD
          • Jan 2002
          • 8039
          #3
          Check the on/off pin length of your retro valve. The e-micro requires the on/off pin to be .670 - .675 inches long to function properly. Now all you need is the Proteam emag sear assembly.
          Except for the Automag in front, its usually the man behind the equipment that counts.

            Comment

            • EsPo
              Dosehead
              • Jul 2002
              • 4140
              #4
              Originally posted by digitard
              The On/Off pins are different lengths in standard, rt and Emags .... but other than that they're the same valve. So you should just keep the Emag valve in the Emicro.

              Sincerely,
              Dave K
              perfectly said
              WWW.EROWID.ORG

                Comment

                • sneakyhacker420
                  AO's Uber Green Guru
                  • Aug 2002
                  • 1247
                  #5
                  retro on/off pin length: .750

                  emag on/off pin length: .712


                  emag on/off assembly also has a quad o-ring setup in the bottom instead of the two as usual in the retro... otherwise its the same as any other retro valve
                  Proud Member Of The AO Cesspool Since 08-24-2002

                    Comment

                    Previous template Next
                    Working...