My Story:" My friend gave me an emag for a real cheap price but it had some problems" well, I have fixed most of the problems it had.The problem I can't fix is .. the gun doesn't recharge fast enough, I pull the trigger the first time and it shoots great the the next times I pull it ,it makes a wierd noise and drops off too.Also sometimes it will leak out the barrel. This is giving me a headache, can anyone help me?
-
-
Do you have Level 7 or 10? If you have L7, try a shorter powertube spacer. If you have L10, try a smaller carrier to fix the powertube leak.
For the shootdown, make sure you have the black quad o-ring in your on/off assembly. Take out the on/off and look to see what color the o-ring is that the top of the on/off pin seals on. If it's black, then that's the right o-ring. If it's clear/yellow, then you need to order the black one from AGD. Also, check the on/off pin length. It should be .712" if you have an all brass on/off assembly. If you have an aluminum top and brass bottom, then your pin should be .725".
If you can't get it tuned up yourself, I can take care of it for you. -
Hey Black, that's darn generous of ya. I'll keep you in mind, should I have an issues with my E-Mag!Originally posted by BlackVCG
If you can't get it tuned up yourself, I can take care of it for you.
Later ~ DaveDavid M. Jones
AO Member #1111 - Formerly davej946
Member of Team AO, MGO 2003
Wildfire :: Division III X-Ball
www.wildfirepaintball.com
Supported by:
Wildfire Paintball
Nelson PaintballsComment
-
Diagram
Hey Black or anybody,
Do you have a webpage that has a better diagram of the valve than airguns page?Comment
Comment