Need help with my X-mag (RT trigger)

[souvy32]

I just picked up an X-mag with the level 10 and I had two problems. The first was leak out the front of the bolt, which I was able to fix by changing to a narrower carrier.

The second problem is that the RT trigger does't seem to be pushing back out. Also, the manual mode will not work at all with the power off. When the power is on, manual works, but in order to get hybrid to work, you really have to squeeze the trigger hard to get one shot off. If anyone has any ideas or suggestions, I would really appreciate it. Thanks in advance.

[AcemanPB]

what PSI are you inputing into your mag?

and what spring are you using with your level 10?

[Schnitzel]

what pressure input do you have? adjustable or preset?

[souvy32]

Background and progress RT trigger on Xmag

I'm using the middle spring right now. The tank I have is adjustable and is set to ~700.

Okay, so now I goy\t manual and electric working, but hybrid mode doesn't work at all. If I really squeeze the trigger hard, I can get it to shoot once. The pin doesn't push out on the trigger as in the other modes. Any ideas?

Thanks a lot in advance, I really appreciate all of your help.