Velocity adjustment of Level 10

[hostage]

Hey I am curious what the working velocity of the 4 different springs tiny(being stock w/ valve), small (smallest of LX sprints), cut spring, large spring?
I have issues running my LX at ~230 with the cut spring. We are capped at ~230 since it is an indoor field. I think I have gotten the cut down to ~260ish. I am thinking about going to the smallest of the LX springs to see if that will lower velocity and should give me a few more shots. LMK
-Doron

[cledford]

Tom stated in the LX install thread that you must use the stock spring if chronoing under ~250fps.

"In our experience either the longest or the middle main springs make the Level 10 config work on all the markers we have tested. If you need to shoot 250 fps for indoor you need to go back to the original main spring."

You can find it in the "main spring tuning" section of the LX install instructions here:

http://www.automags.org/forums/showthread.php?s=&threadid=40904

-Calvin