help....

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • E-Mag man
    Registered User
    • Jul 2001
    • 75

    #1

    help....

    I filled up my nitro tank tonight with my scuba fill station and when i took the tank off it was leaking out the nipple/fill cap thing does anyone know how to fix this, I'm playing tommorow and I need to know
    Thanks
    Last edited by E-Mag man; 10-26-2001, 08:14 PM.
    force it, if it breaks it
    needed to be replaced
    anyway
  • E-Mag man
    Registered User
    • Jul 2001
    • 75

    #2
    up
    force it, if it breaks it
    needed to be replaced
    anyway

    Comment

    • Russ
      Senior Membrane
      • Jul 2001
      • 1935

      #3
      It's most likely due to a small piece of debris caught in the seal of the fill nipple. Although I've never tried this, some say to tap the center portion of the fill nipple with a pin punch and a hammer. This will allow a small amount of air to be purged, and hopfully clear out the fill nipple's seal. Otherwise, you can remove the nipple and either try to disassemble it and clean it, or just replace it. Good Luck.

      Comment

      Working...