pro team warp vs. agd warp..

[warpfeedmod]

okay well I've got a dilemma. I have a pro-team warp on my emag. For those of you that don't know the pro-team warp (as far as I know) had the vibration sensor OUTSIDE the warp unit on the mounting plate. This can be seen in the pics I posted in the emag pics thread here:

http://www.automags.org/forums/showthread.php?s=&threadid=68523&perpage=30&pagenumber=2

Anyway. I got the intelli-link for the emag to the warp, set the jumpers on the warp/in the mag and it works great. However when I'm in manual mode (not e or hybrid mind you) the warp won't work obviously because there's no signal coming through the intellifeed cable into the warp (no electro mode). So I have to switch back to the pro-team warp sensor cable. Is there anyway to hook all this up with one wire or is this my only option aside from getting the AGD warp?

for those that are lazy to click the link, here's the pic.



As you can see, the black/red wire is the intellifeed cable from the emag grip. The other phono-plug is from the vibration sensor mounted in the bracket just behind where the spiral wrap meets it.

[LittMag]

First off, both wires should be attached to one plug, not two. There should be two connections which to solder wires.





sorry about the size and quality, but you get the general idea from the pics

[warpfeedmod]

so what your saying is to take the 2 wires from the intelli-link and the 2 wires from the warp sensor and splice them into one phono plug?

or did I miss something?

[deadeye9]

The warp from Pro Team has a vibration sensor inside the unit. You don't need to use the sensor in the mounting plate. You can see the sensor in the first pic posted by LittMag.

[warpfeedmod]

does it? What warp do I have then that has the sensor in the mounting plate? I tried it without the wire hooked up and it didn't spin

[BTAutoMag]

if you send it to some one who knows something about warps they can hook it up for ya. ill do it.

[rikkter]

the PTP does not have a internal vibration sensor. if they do, not all of them do. mine is a proteam products and its on the outside, just like warp's.

I *think* it was Load SMS that had his warp able to use on the intellifed and back to the vibration by leaving i think two jumpers in it. should PM him about it..

[tony3]

quick ?, dont all agd warps these days come with a 90* adapter

[warpfeedmod]

Originally posted by rikkter
the PTP does not have a internal vibration sensor. if they do, not all of them do. mine is a proteam products and its on the outside, just like warp's.

I *think* it was Load SMS that had his warp able to use on the intellifed and back to the vibration by leaving i think two jumpers in it. should PM him about it..

yeah I got the warp like right when they first came out. Perhaps the new ones have the internal sensor...

Oh well no biggie I mean I can deal with it the way it is