Another leak problem...

[Cow Patrol]

Well here is the deal...

A few weeks ago I gassed up my mag to make sure everything was ready for the next day (i had a game) and it started bugging down and would only shoot balls like 5 feet. (i run a 68 4500 pure energy, which was around at 4000) Eventually it was just a tiny bit of air coming out and sounded like a "thug" (bolt stick?). I took my gun apart, cleaned and oiled it, put it back together, gassed it up and now it's leaking out the back. Regulator seat? piston? any other suggestions? thanks.

[FalconGuy016]

That could mean your velocity is way high, but thats taking the easy way out

[Cow Patrol]

well, i cleaned out the reg. piston and the reg. seat, gassed up the gun and the leaking out the back problem was gone. I went outside and pulled the trigger a few times and it was just back to the bolt stick problem but then gas suddenly bursted out the side and the ASA (i did check and make sure everything was tight). So now my leak out the back problem has turned in a leak in the sides, and bolt stick any help is appreciated...

[IcantBelieveit]

umm the leak out the asa is the o-ring on the screw in tank
and the leak out the back could be Too high of velocity, bat reg seat, or bad reg piston

are you runnin a level 10?

[Cow Patrol]

nope, no level 10, but i'll replace the tank o-ring when i get the chance...

[IcantBelieveit]

if the bolt continues to stick, get a Powertube spacer kit