anyone wanna design my gun for me?

[lack of grace]

I am very new to automags and I am going to purchase my first in parts and put it together myself. I just wanted to get a few opinions on the compatability of the parts I'm looking at now. Any help would be appriciated. I'll be doing this soon

Here what Im looking at so far

mainbody - black p/f rt pro hopper right
Bodyrail - Any recommendations in black
Valve - X-Valve - (Am I correct in thinking that this comes with everything that comes with the level10 upgrade?)
Trigger Frame - Black Dye double trigger frame (I don't want an e-gun)
Miscellaneous - Black dye sticky3's, 12" boomstick, 68ci 4500 MaxFlow, dropzone, 12v revolution, jt flex7

I have the money for this stuff and want to buy soon so if you have to time and could make a quick post.. thanks

[IcantBelieveit]

warp feed

[lack of grace]

one more thing

If you can think of or know of any problems this rig my experience, or anything special I'll need to do to set this up. please let me know.....Thanks so much.

[xen_100]

dont get the dye frame......it will void your warrenty and you will have problems setting it up. most of them you have to change the sear rod length to make them work. the intelli is the best bet here. dont forget to get a RT parts kit and think about the little things you will need.

field strip screw. frame rail screw. air fittings. a slide check or proconnect(the x-valve holds in about 300 PSI when it stops firing. the maxflo does vent when you shut it off)

as for the body rail, go to the AGD store. they have automag or rt pro rails for sale thier in black.

[pbcustom98]

I-Frame

Instead of the DYE Frame...Take a look at the Intelliframe from AGD...very nice frame..

Daniel

[Cryer]

As mentioned above, avoid the DYE frame, go with the Intelliframe from AGD. Also, the sticky 3's dont work with the intelliframe, they'll rip down the back. (I know, it sucks, but the intelliframe is worth that sacrifice...)
Body rail...PM Tunaman , see if he has any Omega body rails left. Those are bad.
Hold off on the mainbody for a couple more weeks and you can order a lighter, annodized aluminum 'ULE' Body from AGD. (vertical feed, cocker threaded barrel, cocker detent, angel threaded feed tube).
X-valve comes with the level 10 setup (all the parts).
As far as the dropzone... In my opinion, thats WAY to far forward, I prefer a shorter drop. (on mine I have a Shocktech Mini-Drop. 2". as opposed to the 8 inchesor so of the DZ) It's all in personal preferance, so if you like it, go for it, but personally I like a much shorter drop.

Oh, yeah....
Welcome to AO!

[lack of grace]

thanks!

I must say....this is a very impressive community of mag users. Thank you all very much.

[lack of grace]

intelliframe

I just read about the intelliframe and I don't quite understand the function....If I don't use an intellifeed is it still a super top notch triggerframe? Also, I want alot of kickback from the xvalve, with this frame deduce that at all?

Thanks again!

[Cryer]

The Intelliframe is a great frame on its own. Yeah, it's coolthat you can wire it to your hopper, but it has a shorter, simpler, and slightly crisper pull than either DYE or Benchmark frames. Plus since its from AGD, it won't void the warranty. I love mine.

-edit-I don't know to much about the x-valve-kickback thingy. I still have my classic A.I.R. valve

[pbcustom98]

I-Frame

I have an I-Frame and I havent Intelli'd it yet...I love it so far..

Daniel

[Remington]

Re: intelliframe

Originally posted by lack of grace
I just read about the intelliframe and I don't quite understand the function....If I don't use an intellifeed is it still a super top notch triggerframe? Also, I want alot of kickback from the xvalve, with this frame deduce that at all?

Thanks again!

The Intelliframe is the nicest mechanical trigger frame for an Automag on the market; nothing compares to an Intelliframe. I think I know what you mean when you say "kickback", we generally call it "reactivity" but both terms are interchangeable; the Intelliframe will not restrict any of the reactivity of the X-Valve and will in fact help enhance the feel of the reactivity as you pull the trigger. On a side note, because the Intelliframe is made by AGD it will not void the warrenty and you know it will be the very best quality money can buy.

Edit: Haha . . . seems a few people posted ahead of me. Oh well. I just Intellifed my hopper last night and I think it's a great side function of the Intelliframe.

[branman444]

dont get the max-flow get the flatline its a lot better. Before i bought my faltline i talked to several people (paintball shop owners) that said they have to send in 1 out of 5/7 that are not put togather right strait from the factory. Any-way its a heads up I love Smartparts but wont be getting one of those. I am talking about the new style not the old ones dont know about those...

http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=102&CATID=12

[Hexis]

It sounds like you just want an RTPro with an X Valve. They come stock with an I-Frame, and come complete (no assembly required). If you really want to assemble it you can just take it apart when you get it.

[johnny dee]

hey, i have a dye frame and i havent had to adjust my rod length yet.. and it shoots fine, but if you reayl want to spend the money the i frame is the way to go i yo wnt a good r.o.f, ive used them and there great, i just like my dye thats all....sounds like your gonna have a kick in gun when ur done with it.

[lack of grace]

trigger gaurd on intelliframe

I'm about to purchase an Intelliframe but I had a question quick. How come the pic's of the intelliframe in the forum have a different shaped triggerguard.....is this something that matters? Forgrip room etc....?