i have a stock 68 automag with level 10 bolt, i decided i want a retro valve, not x valve (not worth the extra cash IMO). So i talked to a friend that will swap me his emag valve for my stock valve plus $160 CDN, im ok with this so far. Now when he sends in my stock valve and cash to get a x valve, could i just swap the pin from the emag valve with the level 10 valve so it works on my mag? or do i have to get a different pin? im only askign this because im unsure if the oin length is right, becuae i know either way that the emag on off pin length isnt right for my 68automag.
-
'people should not be allowed to own paintguns which are smarter than they are'
-Sparq -
I wasn't sure what you were talking about there at first.......yes all you should have to do it swap the on/off pin for a .750 pin. if you have your stock pin, use that. otherwise you can buy them at the AGD store.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pages -
don't swap!
I would suggest not swapping the on/off pin from your classic valve into the emag valve you are trading for. Emag valves are retro valves and, as such, use differnt on/off pins than classic valves. They are shaped differently. It's not just a matter of length. You can, however, order a new on/off pin from AGD. Looks like .750 is the one you want.Are you gonna bark all day little doggie........Or are you gonna bite?
___
Good traders: vf-xx, chris007, Prezents, Sgt. YorkComment
-
good point....didn't think of that........you'll have to get a new one.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
-
so this .750 on/off pin is what comes on the RT valve, Emag Valve, X Valve, or Stock Automag valve?'people should not be allowed to own paintguns which are smarter than they are'
-SparqComment
-
the .750 pin for the Retro valve is the one that comes with the retro for the automag. the RTpro and the Emag both have a slightly different length pin.
go here:
that will show the different lengths that are used for different guns.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
-
lets say after the x valve arrived, we switched pins so it woudl look liek this:
My Mag- EMag Valve, X Valve pin
Friends EMag- X Valve, EMag pin
would both guns function with that, because of my knowledge the x and rt valves use the same length pins'people should not be allowed to own paintguns which are smarter than they are'
-SparqComment
-
yes, that should work........I believe the x-valve ships with the .750 pin.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
-
Yeah... That will work. But I suggest just switching the pin and not the assembly. I think the x-valve has some type of different o-rings on the pin assembly. But yeah it will work.
Does his emag valve hasve a lvlx??
Cause if you send in a classic valve w/ the lvl x on it you will just lose money, and a lvl x.Comment
Comment