I have been looking for a great nitro tank for my gun and i dont know which to buy? Which tank would u buy for a ReTromag?
What would you do?
Collapse
X
-
actually,you can get an 88ci 4500psi PMI fiberwrapped tank from PBGEAR.net for $210.It is the same length as the 68,just wider.My FUTURE set-up: Pro-Team Products Super Nickel Micromag RT P/F,PMI 88ci 4500 psi fiber wrapped tank,Smart Parts Total Freak w/ silver All American front and SS back,TKO Chrome cradle,ANS Venturi bolt w/ foamie,Chrome Dye sight, Chrome TKO slide check,12v revvy, clear AGD warp feed, and clear Dye Stickies.

-
If these are the choices, I would go with the CenterFlag, because I have read on alot of forums and reviews that it has one of THE highest recharge rates in it's class.Black Teflon E-Mag
v1.37 (EM01478)
__________________
- 10" Armson Stealth / 10" Custom Products Barrel
- AGD Flatline 3000psi/68ci Nitro Tank
- Dye Tank Cover [Black]
- Shocktech Drop Forward [Black]
- NW Quick Diconnect Block [Black]
- ViewLoader 12 V Revolution w/ X-Board [Black]
- 32Degrees Macroline [Black]
- VL-Bow [Clear]
__________________
Comment
-
I would go with....
a 68 or 88 ci 4.5K but only if it had an adjustable output.Harleys and Paintball...aint life Great?
-------------------------
Retro PF Mag
Dye SS Barrel
9v Rev
Benchy 2x
47ci 3000 Nitro
Custom Drop forward
Comment
-
None of the above. A 68/3000 Flatline for a bout $299 is the way to go. Comes with the drop, adjustable and real nice on/off.
Comment
-
dont get the centerflag. i had a 68/45 preset and it sucked it leaked and spiked all the time. 3 poeple i know had the same ones and they all were like this. get an adjustable nitroduck tank
Comment
-
Get an adjustable. Flatline or nitroduck have been great for me. The maxflow is another great system you may want to look into. Another is Air America systems. The raptors come pretty cheap, and work nicely. Whatever you get, make sure it is adjustable though.
-Chris
Comment
-
Don't get the ACI, I would definitely go with the Flatline.
Black Teflon E-Mag
v1.37 (EM01478)
__________________
- 10" Armson Stealth / 10" Custom Products Barrel
- AGD Flatline 3000psi/68ci Nitro Tank
- Dye Tank Cover [Black]
- Shocktech Drop Forward [Black]
- NW Quick Diconnect Block [Black]
- ViewLoader 12 V Revolution w/ X-Board [Black]
- 32Degrees Macroline [Black]
- VL-Bow [Clear]
__________________
Comment
-
-
The luxfer tank is also lighter and smaller than the metal alloy one. Unfortunately, they are more expensive. However, they come in 68ci which is definitely better than the 47ci since you get more shots per load.
I would advise to save up a bit more and get the Flatline 68ci/3000psi Luxfer/Carbon Fiber tank.
Black Teflon E-Mag
v1.37 (EM01478)
__________________
- 10" Armson Stealth / 10" Custom Products Barrel
- AGD Flatline 3000psi/68ci Nitro Tank
- Dye Tank Cover [Black]
- Shocktech Drop Forward [Black]
- NW Quick Diconnect Block [Black]
- ViewLoader 12 V Revolution w/ X-Board [Black]
- 32Degrees Macroline [Black]
- VL-Bow [Clear]
__________________
Comment
-
-
DYE-BaLLeR...
Yup, they have Luxfer Flatline systems, check it out at this link:
However, they are only available in 68ci, you can have them replaced with larger capacity tanks though. I know that DarkPhoenix had his bottle replaced to an 88ci luxfer bottle.
Black Teflon E-Mag
v1.37 (EM01478)
__________________
- 10" Armson Stealth / 10" Custom Products Barrel
- AGD Flatline 3000psi/68ci Nitro Tank
- Dye Tank Cover [Black]
- Shocktech Drop Forward [Black]
- NW Quick Diconnect Block [Black]
- ViewLoader 12 V Revolution w/ X-Board [Black]
- 32Degrees Macroline [Black]
- VL-Bow [Clear]
__________________
Comment
-





Comment