The screw above the foregrip that holds it in place is stripped and I cant get it off? What should I do, is there any way to get it off or buy another rail to connect one to?
-
StEEl Grey SoNiC Cocker.The ownage Machine
Yellow to Orange Fade Defiant
14in Boomstick-TI
Orange Fade Warp/Orange-Faded Turbo Rev
Crossfire LPR 68/4500 w/ red cover
Black: Stickies, Lapco Drop, Macro.
PMI 68/4500 w/ Black DYE Cover
-
Yea...
Take an old allen wrench and epoxy it onto the stripped screw and leave it over night and use the allen wrench that is epoxyed to the screw to unscrew the stripped screw. I hope you got that.Team GoodFellas
"Nothing personal, its just buisness"
68 AutoMag Classic S/F
68 3000 Flatline System
Red Kapp Drop Zone 2
Red Redz Tank Cover
Red Redz 3.2 Dimension Pack w/ Belt
12" Smart Parts Progresive
12 Volt Revolution
Front Foregrip
I Intellifed my stock frame:D
Soon to Come...
:D!2002 Matrix LCD!:D
See me ripping it up at Canobie
Paintball-Windham NH
Ill be on the Airball field :-)
Wana buy a pen? There very pretty!
"Stay close to your friends,
stay closer to your enimies"
The Godfather I -
Another way besides the allen wrench and epoxy idea is to use a drill and drill out the allen head screw. Start with a drill bit the size of the allen wrench opening in the screw and drill until the head of the screw pops off. You may have to step up the drill size one or two times to get the head to pop off, just be careful not to get into the body rail. I believe the screws are quarter inch so if you don't go bigger than that you should be just fine. Good luck.Comment
Comment