X-Mag, can not remove rear unit!

[jrawlinson_2000]

I have take out the field strip screw, and de-gassed, the unit moves about 1cm, but will not come out! Any Ideas?

[Dayspring]

Put the gun in Manual, pull the trigger. (Possibly hung up on the on/off pin.) Also, try twisting it a little after pulling the trigger. The Z-Lock is a safety mechanism/alignment tool for AGD Valves.

[rdb123]

Pull the trigger.

OR

Take off the body from the gripframe, where the sear used to be in the body, there should be a small pin. Press that with an allen wrench and viola.

-Ron