I got a strange Minimag problem, I have the XValve and Intelliframe and never encountered this problem until I put the Intelliframe in. If I put very slight pressure on the trigger, I hear a "hssssssssss" (steady leak) coming down the breach and through the barrel. This problem did not exist before with my single trigger. If I am shooting a string of balls and don't let go of the trigger cleanly and have slight pressure on it, it will do the same.
Now I know Mags pretty well, I know it must be that the sear is starting to move down and it must be that the bolt is moving forward enough to let the XValve start venting. The air dies down after a few seconds, meaning the on/off pin is not the problem because no additional air is flowing in. The problem is if the air goes down enough the first ball will only make it half way down the barrel. So severe dropoff and when ball #2 is shot you can imagine the mess in my barrel I'm left with.
My question is whether or not this is a common Mag problem, an Intelliframe problem thats been reported before, and RT Valve problem, or maybe it's a Level 10 problem related to too many or not enough shims? As I said, my gun will fire fine if I pull cleanly on the last shot. But if I am moving up and have my finger on the trigger I don't want to worry about making a bunker move and being left with no air. This problem is really irritating because that's happened to me already once and don't want it to happen again.
Now I know Mags pretty well, I know it must be that the sear is starting to move down and it must be that the bolt is moving forward enough to let the XValve start venting. The air dies down after a few seconds, meaning the on/off pin is not the problem because no additional air is flowing in. The problem is if the air goes down enough the first ball will only make it half way down the barrel. So severe dropoff and when ball #2 is shot you can imagine the mess in my barrel I'm left with.
My question is whether or not this is a common Mag problem, an Intelliframe problem thats been reported before, and RT Valve problem, or maybe it's a Level 10 problem related to too many or not enough shims? As I said, my gun will fire fine if I pull cleanly on the last shot. But if I am moving up and have my finger on the trigger I don't want to worry about making a bunker move and being left with no air. This problem is really irritating because that's happened to me already once and don't want it to happen again.
Comment