Impulse Problems Please Help...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • impy19
    Registered User
    • Feb 2003
    • 522

    #1

    Impulse Problems Please Help...

    Ok, I just bought a brand new Impulse with Vision Eye. It is straight out of the box, all I have done is put on a drop forward. I aired it up and went outside to shoot it, I got the velocity down to a good speed then I tried to rapid fire it, and it wouldn't shoot some of the times. I am using a 12v hopper with it, so is it too slow? Is there a way to turn off the Vision-Eye?

    Thanks
    feedback: http://www.automags.org/forums/showthread.php?s=&threadid=122622&highlight=feedback+for+impy19
  • warpfeedmod
    I came, I saw, I painted.
    • Jun 2001
    • 1265

    #2
    sounds like a dwell issue, but I'm not familiar with impys..

    you might want to check out the IOG here:

    My Trader Feedback
    It was the only tournament I've been to where they have more cases of beer than paint. - gimp

    Comment

    • CoolHand
      Logic Industries LLC
      • Jan 2003
      • 3769

      #3
      Check your other thread.
      Ryan Shanks
      Logic Industries LLC

      Comment

      • John V
        Registered User
        • Feb 2003
        • 29

        #4
        reply

        is this josh grable???? if this is, this is john.


        AND...IF THIS IS JOSH

        YOUR MOM IS A MILF !!!!!!
        for those of you who dont know what a MILF is:
        Mother
        I'd
        Like to
        ****

        Comment

        • sneakyhacker420
          AO's Uber Green Guru
          • Aug 2002
          • 1247

          #5
          is the hammer assembly well-greased with Dow-33 shocker lube?

          sounds like dwell or op. pressure


          whats the guage by the maxflow set at for output pressure going into the impulse? it should be around 160 psi if it has a tapeworm

          when you turn the gun on, it is in non-vision mode and the blue light will flash 2 times per second, push the button once again, you will hear it chirp, and the light will flash rapidly 5 times per second, your gun is now in vision-on mode


          if vision is turned on, you may just be shooting too fast for your hopper and the vision is doing what its supposed to, not shoot until a paintball is fully loaded in the breech

          make sure that your hopper has fresh batteries... also, if you are shooting black, or half-black shelled paint, the infared eye is unable to detect these and vision will not function correctly
          Proud Member Of The AO Cesspool Since 08-24-2002

          Comment

          • Jonesie
            All Around Good Guy
            • Oct 2002
            • 1123

            #6
            Re: reply

            Originally posted by John V
            is this josh grable???? if this is, this is john.


            AND...IF THIS IS JOSH

            YOUR MOM IS A MILF !!!!!!
            for those of you who dont know what a MILF is:
            Mother
            I'd
            Like to
            ****
            Enjoy your BAN, because it's coming after a post like that. You're red flagged! It's only a matter of time now...

            BUSTED ~ Dave
            David M. Jones
            AO Member #1111 - Formerly davej946
            Member of Team AO, MGO 2003

            Wildfire :: Division III X-Ball
            www.wildfirepaintball.com

            Supported by:
            Wildfire Paintball
            Nelson Paintballs

            Comment

            • impy19
              Registered User
              • Feb 2003
              • 522

              #7
              hey dude, dont ban him, he is just screwing with me, he is from scool, one of my friends. thanks.
              feedback: http://www.automags.org/forums/showthread.php?s=&threadid=122622&highlight=feedback+for+impy19

              Comment

              Working...