Yeah, it shoot's almost full auto, and im pretty sure thats illegal. I just dont know how to make it less reactive. I think its the input pressure, but i just got this gun and cant figure out how to adjust it. I have a CP drop forward, and 68 3000 crossfire if that helps. And what is the limit for how reactive ur trigger can be. Thanks.
-
-
Unless you have an adjustable tank, you can't turn down the input pressure. So you're stuck with the set pressure. -
I dont think i do. So im stuck with it shooting full auto most of the time?Comment
-
you need longer on/off pin. make sure that yours is in spec. lowering input pressure also helps.Comment
-
if your tank looks like this:
then you cant adjust hte input pressure
Comment
-
You shouldn't use that one either. It's the low pressure version of the Crossfire tank.
And yes. Fitting the correct on/off pin length to your gun will help to solve your problem. Also, check your trigger rod space as well.
Originally posted by Kevmaster
if your tank looks like this:
then you cant adjust hte input pressureComment
-
Yeah, my tank looks kinda like that. How much are on/off pins, and where can i get them?Comment
-
Keep in mind, this is for the ReTro Valve. Emag pins are somewhat different in length.Comment
-
Tolerance Specifications - E-Mag - RT-Pro - Minimag/Automag - Level 10
E-Mag:
On/Off pin: .712" w/ brass top and double o-ring top.
.725" w/ aluminum top and single o-ring top.
Trigger Rod: 2.125"
Solenoid Plunger Rod: 3.005"
RT-Pro:
On/Off Pin: .765"
Trigger Rod: 1.985"
Retro Valve/X-Valve/Classic RT:
On/Off Pin: .750"
Automag Classic/Minimag:
On/Off Pin: .750"
Trigger Rod: 1.985"
Level 10:
Bolt stem: 2.010"
__________________
These are specs. Measure yours, and see if it is correct length. Use a micrometer or caliper to measure it, because you need really accurate measurement down do few thousands. airgun.com store has the parts, and they are inexpensive..Comment
Comment