LVX Performance Issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Super Junk Pile
    Registered User
    • Jul 2002
    • 13

    #1

    LVX Performance Issue

    I have installed the LVX upgrade on a 68 auto mag without power feed and the stock regulator and it is not leaking. However, it seems like the first shot rolls out the barrel and the second shot has full volicity. Then the third rolls out the barrel and the forth has full volicity and so on. Any explainations?
    Last edited by Super Junk Pile; 03-09-2003, 10:27 AM.
  • Jaymz
    Registered User
    • Nov 2002
    • 190

    #2
    make sure your reg seat is in the right way...oil...sure you installed it right?
    Jaymz

    Comment

    • Super Junk Pile
      Registered User
      • Jul 2002
      • 13

      #3
      I believe that it is installed correctly. I followed the video exactly. I have also oiled the carrier and the regulator. I have read othe posts that talk about increasing the reg pressure to 850 psi. I'm not quite sure how to verify that.

      Comment

      • speedyejl
        Hi!
        • May 2002
        • 1202

        #4
        Work it in and shoot it for a while to loosen everything up. It sounds like the problem is more in the valve or reg. Clean both those out again, and try your old bolt to see if thats the problem.

        Also its LX, just how its normally worded. LVX looks like your trying to say level 5 with excess numerals.




        NYX-Matrix/Mamba IR3
        -----> Click the picture, do it!

        PBnation

        Impulse Owners Group (IOG)

        E-mail

        Comment

        Working...