rt shooting all over

[BajaBoy]

ok as some of u know about my accuracy problem b4.. now the consistance if Crap. I just thought about it, when i was at skirmish i was from 220-260 on the crono. what up with it? i was using a flatline at the time too.

set up..
68/3k flatline.
macro
valve

(no gas thrus or anything)

[nippinout]

Are you doing the chrono properly by holding the trigger back?

Also check your reg seat to see if it's dirty.

Replace it if needed. Most velocity problems stem from a bad reg seat.

Good luck!

[BajaBoy]

Originally posted by nippinout
Are you doing the chrono properly by holding the trigger back?

Also check your reg seat to see if it's dirty.

Replace it if needed. Most velocity problems stem from a bad reg seat.

Good luck!

ok this is a really stupid question, but the reg seat in the flatline or valve?

thanx alot

[cgrieves]

In the valve. Unscrew the back of the valve and remove the brass reg seat holder (round with four grooves). The reg seat O ring is behind that.