Fitting an RT intelliframe on a 68 classic...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Digits
    Canuckle
    • Feb 2003
    • 1329

    #1

    Fitting an RT intelliframe on a 68 classic...

    Woul it be hard?

    And how much do you think shipping would cost to Canada on a intelli, because I might just buy one from automags.org.
  • nippinout
    FUSP
    • Jan 2002
    • 1231

    #2
    Intelliframes are the same across all the guns. It goes on like your stock frame does.
    BAM!
    TNS2K2's Viagra Adventure!

    Comment

    • Digits
      Canuckle
      • Feb 2003
      • 1329

      #3
      Ya, but the guy said i'd have to adjust the sear?

      Is this true?

      Comment

      • BlackVCG
        Grubby Owner

        • Oct 2000
        • 4956

        #4
        If it's built for an OLD RT, then you need to get some sort of spacer for the field strip screw hole. The old RT uses the banjo bolt, which is a larger diameter than the field strip screw, so you need to get a special spacer from AGD to fit in that hole so the field strip screw on your Classic doesn't have room to move around in the large hole for the RT banjo bolt.

        You shouldn't need to adjust your sear. As long as there's a space inbetween the back of your trigger and your trigger rod tip when gassed up, it will be fine.
        My Feedback

        Comment

        • Digits
          Canuckle
          • Feb 2003
          • 1329

          #5
          Alright thanks..

          But hmm.. Does anyone know any Canadian paintball stores that sell the intelliframe for a proper price?

          Comment

          Working...