Setting warp w/ no air?

[ChucktheMAGician]

I was just wondering if it was possible to set my warp up on my emag to spin right w/ out having air to actually cycle the paint. I have it intelli'ed and it has 2 jumpers so far. I was also wondering how many jumpers others were using w/ the same setup. Thanks for the info, Chuck

[ChucktheMAGician]

Ok I have til friday but surely someone has some info.

[sniper1rfa]

just take the hose off and set the jumpers so about 2 balls come out every pull.

[hitech]

With the vibration sensor on, tap the side of the warp. It should spin. You want 1/4 of a turn. More just wastes batteries and increases the chance of a double feed, less may not provide reliable enough feeding. Error on the side of more (1/2 works for me), but don't go over 1 full turn.

Hope that helps.

[theraidenproject]

I have the same set-up, emag intellifed to the warp. I have all four jumpers in, and it spins almost exactly half a turn. I also took out the vibration jumper.