what is the lowest pressure that i can run my level x kit at,and my gun is leaking out of the back when i shoot at normal speeds what should i do
-
-
Are you using a Retro valve or an AIR valve?
When you say lowest pressure do you mean input pressure? If so then 600psi is pretty much the lowest you'd want to go. Personaly I'd use a 800-900psi input.
It sounds like you probably need to turn up your input pressure and turn down your velosity (back of the valve) to get that leak to stop. Possibly you need to move to a smaller spring. If you are using the longest spring you should go to the middle (cut) spring."Relax. Don't worry. Have a Home Brew."
-Charlie Papazian
Feedback: http://www.automags.org/forums/showt...threadid=40134 -
pressure
yea i turned the input pressure up to 800 but it still vents out of the back when i shoot at 270 fps do you think i need a new regulator piston assembly?Comment
-
pressure
o and i run an air valveComment
-
Tinker with the velosity a bit until it works.Sig over 50k
Comment
Comment