Extended SLUG body Autocad File

[White_Noise]

why not RT

can anyone tell me why the slugo wont fit an RT, i was wondering if it was just that the hole is too small for the banjo bolt, if any one could get back to me on that, it would be much appreciated.

[SocialD]

Re: why not RT

Originally posted by mag/cocker lover
can anyone tell me why the slugo wont fit an RT, i was wondering if it was just that the hole is too small for the banjo bolt, if any one could get back to me on that, it would be much appreciated.

Several reasons:
1) Yes, the banjo bolt is a problem.
2) The old RT valve isn't stepped down like the A.I.R., RT-Pro, Retro, or X-valve.
3) The slot for the "Z" lock pin for an RT is in the body instead of the rail like AGD's other markers.
4) The body surrounds the valve on an RT.
instead of the rail like AGD's other markers.

Hope that this helps.

[o0synge0o]

KAPP, make any headway w/this yet?

[DK1]

can anyone put this into solidworks or rhino format... preferrably rhino...

thanks

DK1

[AndrewGore(OTB)]

DK1: Yeah, I'll do that a little later tonight when I am on the shop computer.

Andrew

[angels one]

anyone have the solidworks file?

[AndrewGore(OTB)]

Hope the links work. I apologize for not putting these up earlier; totally slipped my mind. Anywho, these are the files from earlier, but i converted them to IGES and .sldprt If these dont work, let me know. I will also put up the one i started working on a little bit ago. I have to find the file though.

http://www.geocities.com/sk8rpunk0000/slugbody.zip

right click and "save target as".
(note: originally done by Thorpydo)


Andrew

[DK1]

dunno, looks weird to me, like the bottom is clipped off. I can see the back of the surfaces in the inner tube, but the on/off area sticks out funky. At any rate, it looks like part of the surfaces are trimmed off. Thanks

DK1

[AndrewGore(OTB)]

Yeah,
I noticed that when I turned the shading on on mastercam. I forgot to make a surface there. I'll post again later tonight if i can.

andrew

[DK1]

NP, I appreciate the conversion...thanks

DK1

[DK1]

did this ever get converted into Rhino or Solidworks?

thanks

DK1

[Shadax]

Does anyone have the cad drawing of a warp left slug body?

[rocken]

slug file

is this the latest rev 0
i just want to make sure before i model in in solidworks.

thans guys
anyone want to share what they have in solidworks to save me a little time??
ryan

[rocken]

solidworks 2003 sluggo file

solidworks slugg file2003 sw sluggo file hope this helps guys


i posted here and other forum,
i am looking for 3f files of all body parts to play with

[rocken]

http://f1.pg.photos.yahoo.com/ph/rocken999/vwp?.dir=/slug&.dnm=sluggo.jpg&.view=t&.done=http%3a//f1.pg.photos.yahoo.com/ph/rocken999/lst%3f%26.dir=/slug%26.src=ph%26.view=t