jsut got my new xmag today and with ace on it will not fire but with it off it will fire, need help bad!!!!!!!!!!! i did have the hopper on with paint in it......
-
TEAM WELT
SPONSORS
ACTION PAINTBALL
MAJOR WELT -
Ok what the idea behind an ACE ?
The idea it that if there isnt paint in the breach it wont shoot. Neat idea eh ?
If you have paint in the breach and it wont shoot, then you need to adjust your ace setting using a small standard screw driver and follow the directions in the manual.
-RobertServing AGD customers since 93, wishing I could beat some common since into some of them about 5 hrs later.
MCB Feedback +35 --+-- Automags.Org Feedback +25 --+-- PBNation Feedback +24 -
hey robagd
i have a question on the ace
in the cd manual it says that
00 is off
01 single color paint
02 two shell paint
ok but how do you get to ur 02? is it there?
or do you just put the dark color down and set it that way
thanks bro
l8r"The Few Who Do Are The Envy Of The Many Who Only Stand And Watch"
Alway Remember *343*
Si vis pacem, para bellumComment
-
JMAC- you need to adjust the sensitivity. There is a small inset screw on the left hand side of the marker. Turn on the ACE, make sure there's a ball in the breech, hold the trigger down and turn the screw (anticlockwise if I recall) until the marker fires, then add two full turns.
With dual colour paint you may find that the marker stops firing, in which case you have to adjust the screw further until it fires again. This then can cause chops/misfires if the ball arrives "dark side down" as the ACE may sense it too early and allow the gun to fire. In this case you use ACE2 which adds a predetermined delay between the ACE detecting a ball and the marker firing, to allow the ball to drop fully into the breech. It works and doesn't add any noticeable delay to the firing rate.
Fire1811, you may have an older version of the software (pre ACE2). When you turn the marker on it should tell you the software revision on the LED. Get in touch with AGD and check if yours is the latest.Comment
-
its on my xmag that i just got thursday its version
AGD 2.1
to my knowledge that is the latest one?"The Few Who Do Are The Envy Of The Many Who Only Stand And Watch"
Alway Remember *343*
Si vis pacem, para bellumComment
-
up
my Xmag and cphilips dont have ACE 002 is that
the way its supposed to be?
AGD techs HELLO?"The Few Who Do Are The Envy Of The Many Who Only Stand And Watch"
Alway Remember *343*
Si vis pacem, para bellumComment
-
The US X-Mags don't have a 02 Ace setting.
X-Mag Black to Red Fade - Warped
RT Pro - Warped
"The Mags are back in town"Comment
-
Why not? If it's just a software thing, we could get them flashed at any event a tech is at...
(I noticed that when I was looking at my future Xmag this weekend)Comment
Comment