lvl 10 or Intelli grip
I use an RT Pro and have some trouble with ball chops.I do use cheap paint so that could be alot and my gun is bone stock.Its not real bad but I would like to reduce or stop it from happening.With the intelliframe,which if I understand right and when I have it hooked up, will make my hopper spin after every trigger pull and the frame give me a shorter trigger pull maybe reducing a short stroke.The lvl 10 bolt should just stop any pinching all together if I understand everything correct.Of the 2 which from your guys experence would I get the most benefit because at the time I can only buy 1.I also have a concern of the "lvl 10 trouble" post I see,do they have alot of problems.One last question, I am shooting 1 of the first revolution loaders that were put out, what benefit is there in the X-boards for rev's.Sorry Im behind the times hehe.
-
-
get the lvl 10
its ........ummm no words can describe it
"The Few Who Do Are The Envy Of The Many Who Only Stand And Watch"
Alway Remember *343*
Si vis pacem, para bellum -
well you said you had an RTPro.... if so and unless is was one of the 1st few batchs it should have an intellaframe already.... how to tell... take the wrap-around grip off the frame.... if it looks milled out and there are 2 little holes on a cross bar just under the trigger rod... then you have one....
if yes then you'll need about $4 in parts from ratshack..... then just get the Lv10 and have the best of both worlds =)Virus, King of the Basement Trollz has spoken
Comment
-
Its an older RT-Pro with a single trigger frame.Comment
-
Buy used and get BOTH!
You can find levelx for about 60-70 bucks used and a intelliframe for about 60-70(depending on condition!) on the trading forums here.
You won't be dissapointed I promise!Minimag p/f left
Level X
Black Blade Intelliframe
12" JJ cermaic
small blue shocktech drop
12v xboard blue revvy
User feedback
http://www.automags.org/forums/showthread.php?s=&threadid=71039Comment
-
Level 10
From past experience i got the level 10 first which was greatly needed. Although the intelli is fantastic and does wonders rather than the original stock it has to be the level. Only thing i have to worry about now is the odd ball break in the barrel Save your money up then add an an intelli. Just my opinion.
Powered by an Emag and RTComment
-
Actually i saw a level ten new for 60$ but im not sure where. So u can probly get a used one for around 40-50Comment
Comment