emag problem -not shooting

[digitalcave]

i was playing Sunday, and the new Emag w/ x-valve and LvL 10 was working fine until i chopped one ball, and i tried firing the gun and it wouldn't fire in any mode. I went to the staging area and took out the valve and the on/off pin was stuck in the hole in the body so i had to take the body off and the valve finally came out. Anyways i pushed the on/off pin in resting position, and now i got to pull the trigger like 10 times before the gun fires. whats wrong is it the on/off?

Thanks for reading, i know its kinda long story.
-Dcave

[jayel579]

try switching to a larger carrier on the level 10, but check to see how your velocity is first. if your getting good velocity, then change the carrier. make sure you oil the gun too, the level 10 tends to need alot of oil to break in.