Intelliframe Dumb Questions

[MrWallen]

I've had my mag for a while now, went a little overboard when I bought it. I purchased a LX and intelliframe before even firing my gun, but based on posts here it seemed like the logical thing to do.

Now that I know a little bit more about paintball, I was wondering how exactly the I-Frame increases rof (or does it?) all I can tell is that the grip has a mounting place for the switch so you can get your warp or revy to spin after each shot.

Am I missing something?

[rikkter]

well, mainly look at how the frame is built. the benchy you have this excessive pull you dont need, the intelliframe stops your pull compared to the benchy by A LOT. its not really 'SHORTER' it just appears to be because compared to other mag frames, it limits your excessive pull.

[cgrieves]

It also depends on your setup. With an RT valve on my classic mag I've had great results with my Benchmark 2 finger frame. The reactive trigger makes the excessive 'possible' trigger pull irrelevant when set up correctly. With a classic AIR valve the trigger pull is more of a problem.

[fire1811]

the intelliframe is just and all around awesome frame
very solidly built
short crisp trigger pull
can be intellifeeded if needed

i loved mine wish i didnt have to sell it

[rikkter]

Originally posted by fire1811

short crisp trigger pull

people need to get away from saying that. it doens't make the pull 'shorter' it just makes it APPEAR shorter. this isn't a flame. but i feel it'll just confuse more people

[piccolo_dbz39]

how will it work with a classic valve

How will an intelli frame work with a classic AIR valve

[Dayspring]

It'll work just fine. You won't be Speedy McFingers or anything, but the pull will feel lighter. (Not nearly as snappy as the ReTro/X-Valve combo though.)

[piccolo_dbz39]

thanks dayspring

[JAM]

yeah, it doesn't make the pull any shorter- actually if you use one finger on the bottom, it's longer... but you do have better leverage and two fingers rather than one, so it can seem a little lighter.

[Tim Taylor]

Over rated

I didn't find that much improvement with the Intelliframe. It didn't help my ROF at all. I have found that a revvy keeps up just fine with the ROF you get out of the Iframe with out the switch installed. It sounds like a good idea at first but unless you are shooting faster than the hopper it's useless (I haven't seen anyone that can do that).

Save your money I think that unless you get a GREAT deal on a used one, forget it.

[Lord_Whoopass]

Yes if you are not going to hook zippy up to your intelliframe with either your warp or your revy its not really worth having it. A simple dye or benchmark frame would suffice to what the intelliframe would do without the hook up.