Help!!!! X Valve Wont Shoot!!!

[maglover52]

i just got it in the mail and put it on my gun and it wont shoot? i am using air and the sear doesnt pop forward when you gas it up? there is air in the tank so i dont under stand? when you turn the on/off on it makes the little noise like the air is going in but when i let go of the trigger after gasing it up the sear doesnt pop forward help me please!!!!

[la690]

i had this same problem when i first got my x-valve. why did it do this? idk how i fixed it.

[maglover52]

i am thinking its the power tube spacers but i cant get the one thats in out?

[maglover52]

i just tryed a smaller piston o ring carrier and that didnt work im not very happy right now the instrutionc suck on this thing.

[Load SM5]

OK before you go off on the valve, lets nail down the problem. I don't know if this is your first run in with LX but I'm assuming it is. You did refer to the carrier as powertube spacer. The LX will have to be tweaked when you get a valve. The guys at Airgun can't set up LX for everyone's valve, they don't have time.

There are a million and a half threads on setting LX up. Make sure your is set up correctly. It may be something simple. Did you try turning up your velocity until the gun fires?

[maglover52]

yes and that didnt work. and i dont know if its the lx or x valve

[Load SM5]

What gun are you using it on?

[maglover52]

a classic mag and the ****in thing just shot a pin into to my lip

[bunkerhugger]

oil it up! Make sure you lube all the o-rings real good. Every new retro valve or x-valve I've seen was in serious need of love juice.

[maglover52]

still isnt working and im very pissed off at it

[rehme]

did you got to the small spring and turn the velocity all the way up and put some oil in the asa and shoot a tank or two threw it to break it in.

[Ryknow]

you on/off pin might not be a right tolerancy, but try putting in the small LX spring, also do you have a tank with a high enough output? or is it low pressure?

[TheJester]

it's an easy fix if you haven't already fixed it, it's a lvl 10 problem, i had the same problem with mine, all you have to do it turn up the velocity (turn the reg nut in) i had to turn mine in a good 2 full turns to get it to work

[maglover52]

IT WONT SHOOT YOU RETARDS!!!!!!!

[maglover52]

IT WONT SHOOT YOU RETARDS!!!!!!! and i turned the velocity up and it started shooting but then it just stops and leaks air out the barrrel and i have tried all the spacers. and i dont have an adjustible tank.