what is the cfm for a mag and do you know what it is for any other gun like cocker thanks real need help with this
-
www.blingblingproducts.com -
CFM at what pressure? lets say mag runs at 450 psi.(close enough at the paintball) to get 250 in-lb per shot, it needs about .56ci assuming 18bps=10ci/sec or 600ci/min=.35cfm.
lower the pressure, more cfm you need. 250 psi marker would need .63cfm. correspondingly, 100 psi would need almost 1cfm.
Now there are dwell time to take into account, so the solenoid probably needs higher cfm by factor of 2-3.
with high pressure we operate, we don't need huge flow rate
Comment