auotmag rt leaking out the back

alex26rn

Registered User

Join Date: Jul 2001

Posts: 5
#1

auotmag rt leaking out the back

11-01-2001, 04:40 AM

my rt is leaking ou the back between the valve and the gun body that it rests on. this happens after firing for a while. If i unscrew and rescrew the banjo bolt it stops, but the restarts after firing a while. I replaced the banjo orings, but that didn't help. I use a pure energy preset 48/3000 psi.
any help would be appreciated on how to stop this leak. thanks.
Alex.
Tags: None
Drizit

Take me to your Lizzard

Join Date: May 2001

Posts: 943
#2

11-01-2001, 08:23 AM

check to make sure the banjo isn't backing itself out as you go.

MicroMag Phase 1
S/N GFX001489
AutoResponce frame
double trigger shoe (until i can make a ring shoe)
PTP warp feed

And the Biggest, Heaviest, 19+bps'ist Tippmann you have ever seen.

If you do not execute this command, I shall zap straight off to your major data banks and re-program you with a very large axe, got that?

There must have been a time
when we could have said no.
Comment

Comment