Trigger adjustment on the Emag

[Brett23]

Has anyone thought of coming up with a way to place a trigger adjustment screw towards the front of the trigger as opposed to the back of it on the mode switch. I ran into the problem of no longer being able to adjust my trigger pull when i stripped out the screw in the trigger. You know the one that adjusts the magnet in the trigger. Any ways the only way I could shorten it up was to place something between the trigger and the body this solved the problem but it is neither permanent nor pretty. This might be worht looking into R/D guys, but then again im not a air smith or engineer. Tell me what you think or if you can come up with something that would work better then my plastic spacer.

[BlackVCG]

The Timmy63 Blade triggers are like that.

They have an adjustment screw that acts as the magnet in the top of the trigger, the magnet in the center of the trigger is glued in a fixed position and you still use the set screw in the selector switch to adjust the stroke length.