RT/lvl10 Probs

[Md-Defiant]

Hey.... I just bought a RT Pro w/ lvl 10 installed... all brand new..... and the velocity was WAY to high.. around like 350.... so when we installed the angel air.... we used that to adjust the velocity....... but the regulartors kept cancelling eachother out... so we took off the angel air and now its may work but if it doesnt... whats the problem? how the hell do i get the velocity adjusted down to 280 or -..... i was thinking use a smaller spring for the lvl 10 but i could be wrong.... only my second time working on a mag.... help if u can

[Tunaman]

you are correct. Use the next size smaller spring. And dont adjust the velocity with the tank reg...use the velocity adjuster on the back of the markers' valve.

[Md-Defiant]

Prob 2...

hey guys... thanks for the help but..... theres one more problem.... hope u dont mind.... when i tried what u said.... my regs still cancelled each other out...
to the point where it got down to 4 fps.... i was amazed that it could get that low!! lol its not kool 1st shot = 305 fps 2nd = 295 3rd = 280 4th = 260 5th = 230 7th = 180 8th = 155 9th = 120 10th = 93 11th = 54 12th = 4.... as u can see it just keeps dropping... sooooo uncool... i love the gun.... even more i love AGD and their tech support and help... and Tom kicks ***... but my mag is causing me heart break!! :-P plz help

[Brak]

adjust your angel air to about 650-850 psi output. as long as your level 10 is adjusted right, it should work. it seemd like you are starving your valve for air