RT question

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Lawdog
    Registered User
    • Mar 2003
    • 11
    #1

    RT question

    I'm pretty new to Automags. I bought an older RT and wanted to put some mods on it for this season. When putting on the Intelliframe, do I have to do anything special with the sear? Like I said I'm pretty new to Automags so if you can keep it simple that would help a bunch.
    Right now I'm leaking air out the back regulator, and the trigger is not firing. It is pressurized, but not firing.

    Thanks in advance,

    Jeremy
    Tags: None
    • Dayspring
      aka- The Day Wang

      • May 2001
      • 9664
      #2
      Well, ignore the above post. There are SEVERAL things to check.

      First, what Level 10 configuration are you running? Spring/carrier/shims?

      Also, what's your input pressure?

      Answer that, and we can start to get you working.

      As for the Intelliframe question- just make sure you order the RT version of the intelliframe. Other than that, drop her in and go to town.

        Comment

        • Lawdog
          Registered User
          • Mar 2003
          • 11
          #3
          The Level 10 kit is not installed yet, it is here, but wanted to make sure the marker was working properly before tackling the installation of the kit.

          The input pressure is 800. I went through and checked the o rings and they appear to be in place and everything is oiled. The first time I put air to it, it fired once then would not fire again, I could pull the trigger, it was pressurized, but it did nothing. And was leaking out the back. I tried to adjust the velocity up and down and neither helped it one way or the other.
          Again, any help anyone can lend would be great.

            Comment

            • TOOL_173
              ROTC
              • Feb 2003
              • 103
              #4
              Thanx for the ignore me DaySpring.

              leaking out the back of the velocity hole or around it? ?
              -If so...make sure the regseat is tight, did u oil the orings inside the piston ? If not, check that..Make sure nothing is blocking the regseat.
              -If around it. Check the Banjo Bolt and the PowerTube.

              I used to have that same problem.

              when u air it up, hold the trigger back..does air leak? ?
              -If so check the banjo bolt, or powertube.
              Rochester Institute of Tech FAP
              Keep it goin RIT
              University of Pittsburgh
              Panther Paintball (front player)

              "It is the soldier, not the reporter, who has given us freedom of the press. It is the soldier, not the poet, who has given us freedom of speech. It is the soldier, not the campus organizer, who has given us the freedom to demonstrate. It is the soldier, not the lawyer, who has given us the right to a fair trial. It is the soldier who salutes the flag, who serves under the flag, and whose coffin is draped by the flag, who allows the protester to burn the flag."
              -Charles M. Province

              GOOD TRADERS: hostage

                Comment

                • Lawdog
                  Registered User
                  • Mar 2003
                  • 11
                  #5
                  I was just about to head out to the field to try out some different stuff when I could get more air. I decided to try out the old frame on the marker, and that worked just fine. It did not vent out the back and fired like it should. Just puzzled why the Intelliframe wouldn't fire, and why the marker vented with that frame on. It is the RT version frame. Any ideas would be much appreciated, still stumped here.

                  Thanks in advance.

                    Comment

                    • Smokee_2_7
                      Registered User
                      • Nov 2000
                      • 823
                      #6
                      hmm. this would make me think that the leak you get with the I frame is NOT from the reg. back, but actually from the banjo bolt area. If it's leaking bad enough, it would seem that the air is comming from the back of the gun.

                      Check the o-ring on the banjo bolt, and make sure you get everything pushed in right when you install it.

                      Also, im not extremely familiar with some of the ins and outs of the old RT design, but is there any kind of rail bushing that may be stuck in the stock trigger frame, and needs to come out and be put into the intelliframe? if so, this could be causing part of the problem.

                      With the gun just not firing, check and make sure that you guided the trigger rod through the I frame properly, and it's sitting behind the trigger where it needs to be.


                      Carl

                        Comment

                        Previous template Next
                        Working...