Well I have an automag valve that is in great condition, I just went through and replaced all worn items. The problem is when ever I adjust the velocity above 250fps, then it starts venting out the back velocity adjustment hole. I checked the Regulator Piston and it's in good shape as is the seat and the regulator valve. The only thing I can possibly think of is that the regulator valve spring seems a little tight in the hole. I really had to yank on it to get it to come out. Could it be that it is sticking in that hole? I can't imagine what else it could be. I have fixed over 20 different leaking mags before and this is the first one to have me stumped.
-
-
Might want to try, turning the velocity down, dosent matter what the chrono says, try that.
If that dosent solve the problem, make shure your o-rings are oiled. -
250fps isn't high enough. I play woods ball and I'll be at a big disadvantage if I'm shooting 250 or less and everyone else is shooting at 300. BTW, my chrono is accurate, I have chronoed many other guns on it without a problem.Comment
-
If thats the case, then I suggest oiling the o-rings.Comment
Comment