I've got a stock minimag. I've put Co2 and Nitro on it vertical and had the same problem. The gun leaks air (I cannot find the leak) but stops the leaking when I pull the trigger. Any ideas on how to fix it?
-
-
Check/replace the orings in your on/off assembly. After that, check/replace the orings in the powertube & powertube tip. -
where
where is the power tube?Comment
-
where
where is the power tube?Comment
-
The power tube is the thing the bolt slides on to.
The power tube tip is on the end of the power tube. Looks like brass with a large cut in it for unscrewing with a coin.Comment
-
there is nothing wrong with the on/off if the leak stops when you pull the trigger. Is it the powertube o-ring or the PT spacer. if the gun worked before and it doesn't now, more than likely it is the PT o-ring.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
-
fixin my mag
hey could anybody tell me where that little pt thingamajigger is that the previous post talked about.
I appreciate it
RogerComment
-
here ya go, all the aprts are labeled.
the powertube tip is where the bolt slides on to.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
Comment