HELP with Classic RT

[loz]

I cant seem to get my RT to go reactive , i know its in the trigger action as well,but what are the settings to begin with.
how much gap between trigger rod & back of trigger,when its
gased up.
do you need the little spring replaced in the trigger frame.
how long is on\off pin supposed to be.
what tank output pressure is reqd, (using 750 psi at mo.)
i have just bought this, no level 10 at the moment.

[andy13186]

more output pressure= more reactivity=) try like 900

[warpfeedmod]

Re: HELP with Classic RT

Originally posted by loz
=
how much gap between trigger rod & back of trigger,when its
gased up.

not sure if you're doing it or not but it's sort of a cardinal sin to adjust the trigger rod. It's set that length for a reason and I've always heard, from various AGD techs here on the boards as well as users, that you should NEVER adjust that rod.

I would say up your input pressure as andy13186 stated, by output i assume he meant the output on the tank. if you have a pre-set tank then you're probably out of luck.

[loz]

i am using a non AGD trigger frame that came off a normal mag , and have machined it to suit,banjo etc.
hence the need to know the acceptable gap between
trigger rod & back of trigger.

[Jonesie]

Originally posted by loz
i am using a non AGD trigger frame that came off a normal mag , and have machined it to suit,banjo etc.
hence the need to know the acceptable gap between
trigger rod & back of trigger.

If it's an AGD frame, there is no adjustment necessary from the stock trigger rod length.

Later ~ Dave

[loz]

its a NON AGD trigger frame.
cheers