Threading for stock gripframe?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • MikeCouves
    The Enemy
    • Aug 2001
    • 1877
    #1

    Threading for stock gripframe?

    I have been searching around on the forums...but I can't find a post that tells me. I saw it before but I can't find it now.

    I need to go out to Canadian Tire and get some screws for my drop forward that I just bought. I got it all in the mail and I was all excited...but I couldn't put it on!!

    So I need to know the threading and length of the screw that I would need. I have the AGD Stock Frame and a PMI drop forward.

    Also, can I get good ones for AGD that have allen holes instead of a screwdriver one? Because I like to use allen keys, they are easier and can tighten better.

    Thanks,

    Mike
    "If everything is under control your not moving fast enough."
    Tags: None
    • magattack
      R/C Shocker Creator
      • Aug 2001
      • 172
      #2
      mike this is Doug. when you take off the grips there should be two little nuts inside. i couldn't find any screws either so i bought some screws and when you buy screws little nuts come with them. i just took out my nuts and replaced them with the ones i bought. then the screws just go in
      [email protected]

      looking for misc. stuff, odds and ends e-mail me with lists

      [url=C:\WINDOWS\cockerrev.png/url]

        Comment

        • EnW
          Go Red Devils!
          • Jul 2001
          • 837
          #3
          I think the screws are size #10-24
          I am almost positive this is correct.
          Jesus Saves....and it don't cost you a dime! Accept Him and you will be saved.

          9 Volt Halo Mods For Sale
          FREE*Custom Matrix Breech Rods*FREE
          My Feedback
          My Feedback 2

            Comment

            • MikeCouves
              The Enemy
              • Aug 2001
              • 1877
              #4
              I will try the 10-24...I knew it was something like that. Doug that's a pretty good idea...does anyone know the threading for the grips too? Haha, because I got tape holding mine on .

              Mike
              "If everything is under control your not moving fast enough."

                Comment

                • BlackVCG
                  Grubby Owner

                  • Oct 2000
                  • 4956
                  #5
                  10-32 screws for the bottomline and the front grip frame screw. Can't remember the size of the screw that holds on the grips. Take off the grips and tap out the brass piece that the screws thread into. Take that into the hardware store and find a screw that fits.
                  My Feedback

                    Comment

                    • e1ement5
                      Super Seizure Robot
                      • Aug 2001
                      • 60
                      #6
                      Yea I asked this question a while ago they are 10-32 and you way need anything between 1/4 to 1/2 inch depanding on your drop construction.
                      Drexel University Dragons
                      http://www.drexelpaintball.com

                      Lunch Lady Doris says: "More testicals means more iron."

                        Comment

                        • n1mr0d
                          Registered User
                          • Oct 2001
                          • 149
                          #7
                          Yep they're definitely 10-32.

                          10 refers to the diameter, and 32 to the number of threads in an inch? not sure on that.
                          68 Automag Classic w/ Powerfeed body
                          Kapp DZ II
                          Airgun Designs Flatline 68ci 3000psi
                          Smart Parts Big Daddy 14"
                          Benchmark Trigger Frame

                            Comment

                            • MikeCouves
                              The Enemy
                              • Aug 2001
                              • 1877
                              #8
                              Thanks alot guys!!!
                              "If everything is under control your not moving fast enough."

                                Comment

                                • EnW
                                  Go Red Devils!
                                  • Jul 2001
                                  • 837
                                  #9
                                  Hey Mike send me your address...I will ship you the grip screws and the frame screws if you want them.
                                  Jesus Saves....and it don't cost you a dime! Accept Him and you will be saved.

                                  9 Volt Halo Mods For Sale
                                  FREE*Custom Matrix Breech Rods*FREE
                                  My Feedback
                                  My Feedback 2

                                    Comment

                                    • MikeCouves
                                      The Enemy
                                      • Aug 2001
                                      • 1877
                                      #10
                                      That's alright. I alrady went out to Crappy Tire and picked some up. But if you have allen hole ones that would be really cool. Because the ones I have are like a Phillips screwdriver one. Lol...

                                      Mike
                                      "If everything is under control your not moving fast enough."

                                        Comment

                                        • Drew
                                          cheap and easy, thats me
                                          • Nov 2001
                                          • 183
                                          #11
                                          actually I think they are 12-24, I was looking for some the other day at a fastener shop, my local PB shop had a couple he gave me.
                                          "if I over shoot you, will you respect me in the morning?"

                                            Comment

                                            • Minimag4me
                                              Registered User
                                              • Jul 2001
                                              • 779
                                              #12
                                              i just bought some today they are 10-32X i just bought screw driver ones.
                                              -Minimag Body HR
                                              -Retro Valve
                                              -Z grip with extender
                                              -12V X-Boarded Revvy
                                              -6 barrels including:10 Inch DYE SS, 8 inch Steel Wind, 8 inch stock minimag barrel, 12 inch BOA barrel, 12 inch Lapco Autospirit, 16 inch SPAA
                                              -68/3000 Flatline

                                                Comment

                                                • Drew
                                                  cheap and easy, thats me
                                                  • Nov 2001
                                                  • 183
                                                  #13
                                                  oops

                                                  sorry, I shot before looking

                                                  12-24 in the bottom of the frame and 10-32 in the grips
                                                  "if I over shoot you, will you respect me in the morning?"

                                                    Comment

                                                    • Minimag4me
                                                      Registered User
                                                      • Jul 2001
                                                      • 779
                                                      #14
                                                      oh and i got the 1/2 ince length with my cp drop and it works with my hyperframe but with a stock gripframe you may want like 3/4 inch. if u mean the asa screws on the bottom of the frame and the one in front of the trigger they are 10-32 with the stock nuts.
                                                      -Minimag Body HR
                                                      -Retro Valve
                                                      -Z grip with extender
                                                      -12V X-Boarded Revvy
                                                      -6 barrels including:10 Inch DYE SS, 8 inch Steel Wind, 8 inch stock minimag barrel, 12 inch BOA barrel, 12 inch Lapco Autospirit, 16 inch SPAA
                                                      -68/3000 Flatline

                                                        Comment

                                                        • MikeCouves
                                                          The Enemy
                                                          • Aug 2001
                                                          • 1877
                                                          #15
                                                          Yeah the stock gripframe is long. I had to get 1". I have a PMI/TKO Drop Forward so it's kind of thick.

                                                          Thanks fer da help guys, I got it all put on now...and it's perdy.

                                                          Mike
                                                          "If everything is under control your not moving fast enough."

                                                            Comment

                                                            Previous template Next
                                                            Working...