Poor velocity Consistency

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • eljimbo
    Registered User
    • Aug 2002
    • 13

    #1

    Poor velocity Consistency

    I purchased a used RT, S/N 00360, so its pretty old. Again, I bought it used. I put a lvl 10 kit in it right away. For the past few months it has had very poor velocity consistency.

    My air system is an 88/4500 dynaflow, puchased from a friend who had rather good consistency with it on his matrix. Is the air system reputable for mags? The guage seems to show a lot of dropoff on each shot.

    I was wonder what parts should i look at, or replace to improve the consistency. Its out of free repairs i've been told, so should I Just pay to have it overhauled by AGD?
    I'm basically looking for a nice and consistent gun, I can use in tourney play.
    "I aint nevea been to jail!" "What you want a cookie?"
  • kenny45749
    Registered User
    • Mar 2003
    • 53

    #2
    For velocity inconsistency, I would check the reg seat o-ring if I were you. Also if you are using too long of a spring, or too tight of a carrier your bolt will suffer alot of "stiction"(great for stopping on paint, but will make the bolt move inconsistently, and thus give bad fluctuations over the chrono). I would check these too areas to be sure they are in proper shape, and check back with a report on if it helps or not. good luck

    Comment

    Working...