xmag trigger stop

[roczilla]

is there a way to put a trigger stop on the stock xmag trigger or are there any aftermarket triggers like a blade or such that has stops on them

[CoolHand]

Its made from aluminum, therfore it can have a stop put in it.

If you'll send the trigger, and mark the best spot for a set screw to rest on the frame, I will drill, tap, and install a set screw for $15.

Just make sure you mark exactly where you want the set screw, because I will put it right on the mark.

Hope this helps.

[HYPER]

Man its been a while since Ive been on these boards. Anyways...

Shouldnt there already be a trigger stop on the selector switch assembly? I thought all Emags had them. Just remove the body and adjust the stop from above with a hex wrench.

Either all Emags have them or else my micro-E is just special =).

-Hyper

[fire1811]

yep take the grip frame off and
ther is a set screw on the top of the trigger.

Make sure you take the pin out of the sear before you try to take body off.

[roczilla]

thanks i appreciate the input