ULE Bodies and Detents Notice

[cphilip]

Sure! just PM me your address and I send you one just in case. If your body has not shipped it may be one of the hold backs that will be adjusted. But just in case I send one out to you.

[omni]

So ... The current Batch of ULE's will be sold with the so called O-ring Mod right, you aren't going to scrap them? (I know AGD always has those attic sales for tiny little anno flaws)

I personally don't care about a little O-ring on there. As long as it works with it

[AutomagRT1483]

Added the carrier o-ring to it and it worked flawlessly. Thanks AGD!:)

[dogEmedic]

So far I have been lucky and have no had any problems. I bought a puple ule, put it on my emag, no extra orings, no adjustments and it worked fine.

[Darkstorm]

1 1/2 cases

I was at TRev all weekend and shot 1 1/2 cases of paint. The ULE with the extra oring worked fine. I would note the paint was small, but worse case I would have needed another oring.

I have a richocett with the newer neck and with its orings fit in the vertical feed great. The hopper was tight and no issues. It was a really nice feel and a lot of people thought the gun looked great. I know of a few more people that want one now.

The only problem I had was once the gun did not recock on a ball it tried to reset on. I had to push the bolt the rest of the way back with my finger.

[aaron_mag]

God cphillip goes the extra mile for people...

Hopefully I'll be able to figure out how to do the fix once I get it. I'm not mechanically inclined but that is why I use the darn mag. I don't like sitting in the staging area coming up with ingenious adjustments to get the marker to work. If you love to tinker that is great but maybe some of us do not. I'll eventually get a flatline tank but I'm not looking forward to figuring out how to mount it etc.....

When I preordered it I thought I was going to have to wait much longer (mine is being shipped). Everyone was clamoring that they needed the bodies yesterday and then are mad that we need to do some modifications on our own. Maybe we customers need to be a little patient on our preorders.

[Ironmag]

Well, mine had no problems with it at all, didn't chop or anything when I played yesterday (like it would anyway with LX). I guess I'm one of the fortunates that don't need the extra o-ring.

[aaron_mag]

Got my ULE today and was shocked to discover how easy it was to add the o-ring to the detent (never had a marker with a detent like this before). This really isn't a problem at all.

Now I have to decide on a cocker threaded barrel and order it. Then the ULE will be in business.

[Tunaman]

I say if we Rag on this guy Tom enough, he will scrap the whole project...and then we get NONE! I think Tom is thinking "VACATION". Lay off a little. Rob was correct on saying that all parts cant be made "idiot proof". This is an adjustable ball detent and therfore needs adjustment af some kind. Tom mentioned how to adjust it...not too tough.

[aaron_mag]

I am not mechanically inclined so I was worried I wouldn't be able to make the adjustment. Once got my ULE, however, I was surprised how easy it was. It really is a non issue.

[cledford]

Originally posted by Tunaman
I say if we Rag on this guy Tom enough, he will scrap the whole project...and then we get NONE! I think Tom is thinking "VACATION". Lay off a little. Rob was correct on saying that all parts cant be made "idiot proof". This is an adjustable ball detent and therfore needs adjustment af some kind. Tom mentioned how to adjust it...not too tough.

Hear, hear!!!!

[lack of grace]

Re: What is wrong with you people?

Originally posted by ddinwdc
Don't appologize, Skoad. The guy drops $150 on a product and has the audacity to expect it to work? Give him a break. As for RobAGD, you work for AGD, right? Is that how you regularly respond to your customers?

I agree with everything you said... I don't think I can find one post that Rob is actually kind to someone with a mag problem...I actually just looked.

[tmnothing]

AGD, what did you do to the bodies that you guys took care of before you sent out? Did you use the LX o-rings like you suggested in this thread? How are the new batch of ULEs going to be fixed? I'm just curious. I was wondering whether or not it would be a big deal to try to find one right now or wait until I can get a new one straight from your online store. By the way... is there an ETA on the next batch? An approximate date would help alot...

[automagster]

how do i get a new rail for my old RT so i can get a ule

[chronic john]

hey im new to the site here but ive been usin mags since the first ones ... i love these new ule bodies ... how do i get 2 of them 1 in red and the 2nd in green ... any help would be greatly appreciated ...