Power feed or Vertical feed - Pro's and Con's

[Newbie]

I want to buy an RT Pro, but dont know which type of feed to get...any info on the pros and cons of each would be greatly appreciated.

[rehme]

power feed was used to stop blow back of the gun the vert feed i think is better because now with LX you dont have any/barely blowback and you dont use a elbow to mount your hopper

[greenkill]

with the vertical feed, the hopper is also centered and the gun is balanced a bit better... you may think it disrupts your aiming, but you can look down the side of the barrel just as good

[johnny dee]

the only thing ive noticed is that when i was using my friends centerfeed body i had to put a ring of electrical tape around the feed neck of my revvy. these have the smallest necks, halos have the biggest and than the egg has the middle i believe. so my hopper moved around quie abit without the tape. other than that i really liked the centerfeed over the powerfeed.

[bunkermaster10]

Feeds

I know with some guns when shooting a center feed gun, when you chop it is a pain in the rear. Because the paint flys right up to the hopper and gets all over the paintballs and you continue to chop.

[johnny dee]

I know with some guns when shooting a center feed gun, when you chop it is a pain in the rear. Because the paint flys right up to the hopper and gets all over the paintballs and you continue to chop.

lvl 10 my friend

[bunkermaster10]

LVL X

OH i know level 10. I said some guns. Like spyders would do that a whole crap load going into the hopper. So I'm guessing the non LX centerfeed mags would do the same (Paint going to the hopper).