gas thru grip? regulator? expansion chamber? what to get?!?!

[Clay Henry eats at subway]

ok, heres the deal. when i originally purchased my mag i bought it and a PMI inline regulator. well, now i realize that the minimag already comes with a regulator so now this double regging is KILLING ME!!! i cant shoot far at all sometimes! so, i was wondering, do i just need to get a gas through grip or an expansion chamber? i dont know much about these so hopefully you can help me out and also if say i should get an expansion chamber what kind should it be or vice versa. thanks a WHOLE lot and i really appreciate it. thx again, Clay Henry.

(p.s-im not really clay henry)

[Clay Henry eats at subway]

please

please I really need to know before i make another bad purchase. should i get an expantsion chamber or a gas thru grip?????? please help. thx alot

[Toakes22]

If you are running an HPA, which I see in your sig, all you need is a foregrip. It can be gas through or not. Gas through, with help of macroline and such, goes from ASA to bottom gas thru then gas exits through vertical asa and then goes into valve. Non gas thru just goes from valve to asa. By the way they are reall cheap. Only like 15-25 bucks.

You don't need an expansion chamber unless you are running CO2 b/c it allows the CO2 to expand to prevent liquid from entering the gun.

[tmnothing]

I've got an x-chamber on my minimag cuz I used to run co2 but I just got a PMI 68/3000 hpa tank so the x-chamber is coming off as soon as I get the gas-thru grip I ordered from AGD. So far that AGD foregrip is much cooler looking than any other that I've seen so I went with that one but any will do. Check it out at www.airgun.com.

[Clay Henry eats at subway]

DYE

i was thinking about the DYE gas thru...has anyone ever tried one of those?

[Dayspring]

A gas through is a gas through is a gas through.

Basically, they're hollow tubes that have an air line through them. Not much to it. Buy the one you think looks best. :)