I'm sick of my mag.....

[Automag]

All this stupid thing does is leak out the back....I turn the velocity up and it leaks so fast that I run outta nitro before I know it......I had 1500psi and ran out during a 3 on 3 scenario and we beat them pretty fast....I know it's not because the bore size doesn't match the barrel because another guy was borrowin his friends mag w/ the same barrel I had tried part of the day (stock automag barrel) and was shooting All Star like me too and not once did his do what mine was....don't get me wrong it performed in the same great way but god it's annoying that loud hiss in your ear and your tank just going out so fast that you aren't much of a help to your team except as an obstacle for the other team to pounce all over......in fact that's what I did in two of the games just ran around and diverted fire.....Someone help me and I will be forever grateful.

Brandon Baker

[Tunaman]

Try a parts kit...

[Automag]

got one it didn't help..changed all the orings and everything....and nope it just decides to be ignorant and act as if it were obsolete....which it soon will be when i dous it in gasoline and burn it

[Miscue]

If you're having troubles with it that you can't resolve, send it to AGD and they'll take care of it.

[BlackVCG]

Your piston needs to be replaced. Call AGD and talk to their tech department. They will either send you a new piston or have you send it in and make it work perfect.

[alf]

maybe i read your post wrong

but, have you tried turning the velocity down?

mags leak out the back when they fire faster than 340 fps as a safety measure...

[xmetal2001]

You can't stop liking your mag, your SN is "automag". Its soo....

[Drizit]

it's your piston, I had (and have) the same problem as you. with mine however there is something very strange I need about 700psi behind the ball, not input but behind the ball. I checked with a max flow. I pulled the reg pin and seat then started firing over a crony until I hit 280fps and then looked at the gauge it said about 700psi. since the reg piston was never designed for that kind of firing pressure I just stuffed the back of my velocity adjuster with a wad of Teflon tape. I loose the safety of having it dump out the back if it's over pressurized but then again it's always over pressurized, and I run air not co2 so it's not really that dangerous. however if you're on co2 don't even think about doing my quick fix. if your gun or tank gets hot and you have that hole plugged your next shot will be so hot it's not even worth considering.

[Mag89]

Your regulator seat is dirty, just clean it off and it should stop the leaking out of the back of the gun.

[KayleAGD]

First of all please don't mess with your piston !!! This piston is there as a safety device to keep your gun from over-pressurizing. If it is bypassed and the reg in the tank fails you have a 4500 psi bomb next to your scull (not to mention the ball it may shoot). The reg-seat was my first choice as the problem but if you put in a parts kit this should have been replaced. Sounds to me now that there is some trash in the piston seals not letting it hold operating pressure. In short call AGD and see about a replacement (and be nice we are here to help)...