RT Pro problem or is it fine?

[wobbles82]

Whenever I let my RT-Pro sit for say...15 minutes or so, then I go onto the field I have to pull the trigger around 10 or so times to get it to start shooting again, is this supposed to happen?

[joeyjoe367]

nope.

Is your RT lvl 10'ed?

[personman]

Yea, if its level 10, switch to a smaller spring.. that happened with my mag, then I figured it out :-D
Changing the carriers up might work too, I dunno.

[Dayspring]

Leave the spring. Go up 1/2 a step on the carrier. Oil it when you put air in the gun.

[wobbles82]

Ok?

Thanks for the help so far...so im definately not changing the spring right? The carriers are included im pretty sure, they are in a baggy and are like brass-like? How do I put them up half a step? As for oiling, I oil my drop forward right, that being the air receiver and all. Sorry bout all the questions, I just dont wanna mess up my Pro, ive used a Classic for a year, lol.

[Dayspring]

Carrier Sizes-

Line= Full Size
Dot= Half Size

2 lines= 2 Carrier
1 line 1 dot= 1.5 carrier

[wobbles82]

Ok...problem

Ok, I changed the carrier, and aired up the gun, turned on the on off on my drop, and air pressure just shoots out the reg on my tank. What could I have done wrong? Did i put the carrier in wrong?

[Dayspring]

If it's shooting air out the back end, velocity up too high.

[wobbles82]

It keeps leaking down the barrel!

All it keeps doing it leaking air down the barrel, I have changed the Carrier three times, I dunno what the problem is but its freaking annoying. Whenever I pull the trigger and hold it in the leak stops, but everything on the lvl10 setup was done perfectly, I do not get why it should be doing this, and yes the spring is fine as I had it chronoed in already, and it only leaked out the valve when I turned it too high or too low. what is the problem???