this is a continuation from another thread i started that kinda left the topic it started from so i thought i'd start this over so it gets more attention (plus i have even MORE questions..yay).
just down to two questions now guys...
1. if i HAD to pick b/t an expansion chamber and an anti-siphon tank to combat liquid co2, which should it be?
2. the manual says that it's a bad idea to attach a warm tank to a cold gun (i.e. bad idea to put a new tank on after the first one runs out of gas). i'm pretty certain i'll be using more than one tank a day, so how can i get around this problem? (here's the quote from the manual: "we have found that putting a warm tank on a cold marker causes the warm co2 vapor to enter the air chamber where it condenses into liquid; this is identical to freezing down a 7oz tank before filling from the warmer 50 pound tank- avoid this.")
just down to two questions now guys...
1. if i HAD to pick b/t an expansion chamber and an anti-siphon tank to combat liquid co2, which should it be?
2. the manual says that it's a bad idea to attach a warm tank to a cold gun (i.e. bad idea to put a new tank on after the first one runs out of gas). i'm pretty certain i'll be using more than one tank a day, so how can i get around this problem? (here's the quote from the manual: "we have found that putting a warm tank on a cold marker causes the warm co2 vapor to enter the air chamber where it condenses into liquid; this is identical to freezing down a 7oz tank before filling from the warmer 50 pound tank- avoid this.")
Comment