Leak, Trigger and Level 10 Related to Eachother??

[YourMasterJulian]

Ok, Sometimes there is a leak inside the gun out of the bolt. When I apply a little pressure to the trigger, the leak stops. I temporarily solved the problem by putting a little piece of plastic in as a spacer between the trigger and the silver rod coming out of the frame, as to apply that pressure.

Is this at all related to level 10? because the leak stops once a little pressure is on the rod. Im thinking, can you lengthen the rod?

If you change any trigger components, such as a new frame, will you have to retune the level 10 settings? THANKS!

Julian

[askman]

sounds like you need to play around with shims in your level x

[athomas]

Remove a shim and you will be fine.

[joez]

first tighten up the field strip screw, and if that doesnt help, then remove a shim.

[YourMasterJulian]

Thanks ill try that!