My mag classic comes in a couple of days. How hard is it to tune? I want to mess with it and tune/upgrade it myself.
Thanx
Thanx
-
-
no tunning required unless your going to run a lvl.10 bolt, just gas it up and start rip'n on it.Cockers and Shockers and Mags, OH MY !! -
Mags come out of the box pretty solid. I dont think there is anything on it that you can "tune", that shouldnt already be optimally set. The only thing on a stock mag that could even be adjusted is the trigger rod, and it is already set to be perfect. The best way to get a mag to rock is to be smart about what upgrades you put on it. Know exactly what you put in and on your gun and why and you will be ready to rock. Most all the upgrades even are "drop in and go" modifications that dont require any work, only that you swap it with the existing part. If you want a list of recomended upgrades just come back and say so and i am sure myself and many others will be glad to rant about what we like
. good luck
Comment
-
thanx guys, actually as soon as my mag comes in the bolt is gone, and I'm putting in a level 10. I also heard i should have a reg. or an adjustable air system. What do you think?Comment
-
Both those statements are false.I also heard i should have a reg. or an adjustable air system.
get a nice barrel or 2 (.689" & .693")...did I mention I like CP barrels
Comment
-
The reg is not needed, but an adjustable air system would be a smart move. It will allow a little more adjustability in how your gun shoots. Most pre sets will get the job done, but being able to adjust the input pressure will let you better set up the Level 10 and possibly a retro valve if you see getting one in the future. good luckComment
Comment