But if all it takes is removing the reg seat and piston, wouldn't it be easy to try? even if it offers no performance gain, and I have a spare o-ring kit (they need replacing anyway), would I have nothing to loose by doing this? but I would have to turn my stabilizer all the way down... then adjust it up to speed, since I won't have an AIR anymore... I usually just keep the stab as far out as possible...
-
Hey Zero, how much did that Chipley cost ya?
Originally said by Boggerman When I got married I thought it would go down too... The insurance, not the wife.
FRUITCAT!! -
it wont damage anything, if that is what you mean.
dont take out the reg piston though, or the back half of the valve will open to atmosphere
just the seat and the pin.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
-
all you do is remove the reg seat and pin. Removing the piston will result in a massive leak that will vent your tank in 4.6 seconds flat.
I did this once it only helps if you are using co2.Did you hear about the new european weapons contracts? France is going to make the wooden sticks Spain making the little white flags
Comment
-
I know not to remove the piston (I'm not THAT stupid)
But this is something I'll try in a week or two when I have access to a chrono again... until then I'm not going to be messing with it.... much...
Man, I NEED to tinker! maybe I should just buy a cocker...Hey Zero, how much did that Chipley cost ya?
Originally said by Boggerman When I got married I thought it would go down too... The insurance, not the wife.
FRUITCAT!!Comment
-
must have been a typo?Originally posted by TheFlamingKoosh
But if all it takes is removing the reg seat and piston, wouldn't it be ea....................
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
-
actually yes it was. I was thinking the piston was the reg pin (you know, the one that looks like a german hand grenade!)... I got the terminology mixed up, but at least I knew what I was saying...
Hey Zero, how much did that Chipley cost ya?
Originally said by Boggerman When I got married I thought it would go down too... The insurance, not the wife.
FRUITCAT!!Comment
-
didnt read all the replied but im currently working on taking off the back regulator part, capping it off, cutting the rail, and sticking on an inline regulator.JaymzComment
-
jaymz, that is indeed the way to go...
"The Fine Print: Discontinue use if your eyeballs suddenly get way smaller."Comment
Comment