Gah

[Jaymz]

OK my mag has been NOTHING but trouble and im seriously looking at selling/trading it, the mag just doesnt seem to be the gun for me, I dont know why but it just isnt. But so ive got a nice setup but cant make it work. It just wouldnt fire, id get resistence on the trigger (using a z-grip) so im like whatever screw the "golden rule" im adjusting my sear. And wal-la it worked, consistency was terrible but it worked...it was from 211-251...any ideas? Reg seat is clean AND in the right way, everything was broken down, oiled, and assmebled correctly!

[Paintchucker]

Before you sell your mag...

Have you tried a new parts kit for it? And of course the obvious, is it oiled up???

[Jaymz]

Re: Gah

Originally posted by Jaymz
everything was broken down, oiled, and assmebled correctly!

Yea its oiled...

I checked ALL o-rings for wear and they seemed to be ok, I think ill send it in to AGD and see what happenes....

[TuffManJones]

what kind of tank are you using?
does ur barrel match your paint size? if its way off that can lead to an inconsistent marker also i've noticed that one of my mags doesnt shoot as consisent when shooting under 275fps, but it could be several things.

[Jaymz]

Originally posted by TuffManJones
what kind of tank are you using?
does ur barrel match your paint size? if its way off that can lead to an inconsistent marker also i've noticed that one of my mags doesnt shoot as consisent when shooting under 275fps, but it could be several things.

Tank- 68/3k Nitro Duck, tested on other markers, worked fine

Barrel- Full Freak set, paint match = fine

[Jaymz]

up

[cphilip]

Did you check and see if you had a rail bushing in there? Or if your Z Grip is realy a RT Z Grip and your missing the spacer? If you adjusted the trigger rod and it helped then something is off in the alignment further down. Those are two possibilities...

[Jaymz]

rail bushing? And the guy i talked to said its a normal one, in fact I had pictures of it on his normal gun and hes cool/knowledgable so I doubt he lied or anything...

But what a rail bushing and why hasnt ANYONE thought of this? (ive had this ongoing in pbreview for months).

[spazzed]

Originally posted by Jaymz
But what a rail bushing and why hasnt ANYONE thought of this? (ive had this ongoing in pbreview for months).

Not my area of expertise, but I thought I'd chime in on this.... You were on pbreview, whadya expect?

[Jaymz]

AGD forum at pbreview is actually very good, in fact its as good as this one IMO, more idiots with worthless comments there but it takes longer to get replies here. All in all both kick ***

[litestab]

simliar setup

is the twist lock supposed to stick out the bottom like this? also my barrel doesn't click, anyone know why?

[xen_100]

if you pull and hold the trigger, does it leak at all? if the trigger rod is not the correct length, ift may not be sealing the on/off all the way. that could lead to erratic chrono speeds. but I agree with cphilip, something is out of alignment.

[litestab]

zen i'm not the guy that originally posted.

[GT]

Re: Gah

Originally posted by Jaymz
consistency was terrible but it worked...it was from 211-251...any ideas? Reg seat is clean AND in the right way, everything was broken down, oiled, and assmebled correctly!

quick Q. Does it shoot at what you chrono'ed at for the first shot, and then after it sits for a few seconds shoot close to the desired velocity?

I had a problem simliar to this. first shot around 290 second 180, however if the gun sat for a few seconds it would then fire 290 again. check to make sure your on/off isnt warped.

just a thought

jb

[Jaymz]

I thought of that too and tested for it but no such luck, it would spike are consistent shots, like 1 a second or 2 seconds or whatever