intelliframe ???

[micromag98c]

to put the inteliframe on my gun (micromag) do i have to do any modifications to the gun ? and do you have to hook the intelliframe to your hopper

[ChucktheMAGician]

Remove 2 screws, one on the back and one above the trigger, take your old frame off and put the intelli on, making sure the trigger rod is laying in the frame the right way. You don't have to hook it to the hopper if you don't want to. Oh, welcome to AO, sit back and enjoy the ride

[micromag98c]

oh thanks i was wondering ifi needed to do anything to the sear or anything

[BobaPutt]

nope you dont have to alter anything, you may want to intellifeed your revvie or whatever you have though. If not you just spent alot of money on an expensive frame when you could have gotten a benchmark for much less.

[paintbattler]

No, do not change anything on the gun. All you do is unscrew the field strip screw and the screw under the grip. Also, make sure you don't change how long the sear is. That wil mess it up a whole lot.

[micromag98c]

hey i have a rico 2k can i hook the intelliframe up to that ?

[ChucktheMAGician]

I thought Ricos turned after every shot anyway? Running a wire to get it to do that would be a waste. Just a thought:)